Mar 18, 2022 | Water & waste management news

The ‘Christina O’, a 1943-built motor yacht named after the only daughter of Greek shipping magnate Aristotle Onassis, has been fitted with a low-flow Bio-Sea ballast water management system from French company Bio-UV as part of a major refurbishment at the D.K Fotinakis yard, in Greece.

To fit the limited space available in the 325ft vessel’s machinery room, the 87m3/h capacity Bio-Sea L03-0087 system was supplied on two separate skids – one housing all mechanical components, the other the system’s electrical works.

Costas Carabelas, MD Costas Carabelas Technical Office (CCTO), the naval architect and engineer responsible for yard and equipment selection, engineering and installation, said: “System size was a critical concern. It was a challenge. This ship is like a museum, so any new installations had to fit in the existing space without requiring any significant structural change.”

The French manufacturer suggested a plug-and-play, split skid version of its Bio-Sea L-Series as this allowed CCTO’s technical teams to dismantle the main components to easily pass-through the hatches without cutting holes in the vessel. The BWMS was rebuilt in-situ, in the engine room. The bespoke BIO-SEA skids were successfully installed in July 2021 subsequently commissioned by Bio-UV Group’s service partner Macor, based in the South of France.

Carabelas said: “The level of service provided by Macor during the commissioning was excellent. The Bio-Sea system is operating as expected; performance is excellent.  It is very simple to operate, and the yacht is now compliant with the IMO D2 standard and the USCG regulations. In Bio-Sea we found a ballast water treatment system that meets the very high standards required of this sector: a compact design, high-end components, yacht-standard aesthetics and a competitive price.”

Franck Perier, technical supervisor, Bio-Sea by Bio-UV Group service department, said: “This is a very famous ship and the testimony received reflects the positive feedback we get from all operators of a BIO-SEA system. Since the Christina O installation, CCTO has recommended Bio-Sea systems to other luxury yacht operators.”

BIO-SEA claims a reputation in the sector for BWMS installation simplicity and flexibility, with a significant number of newbuild and retrofit installations indicating “dynamic market conditions”.

Perier said: “There is certainly increased demand for low flow rate BWTS for retrofit and newbuild yacht projects.”

The Ballast Water Management Convention applies to all vessels that take up and use ballast water on international voyages. With flow rates ranging from 10m3/h to 120m3/h, the Low-Flow BIO-SEA range can be available with CuNiFe pipework for enhanced corrosion protection and in a range of gloss finishes. Additional upgrades include a new PLC with a more compact, touch screen and control cabinet.

Florian Cortes, Technical Director, Bio-Sea by Bio-UV Group, said: “We have enhanced the system specifically to meet stringent yacht sector requirements. In addition to size and ease-of-use, the Bio-Sea L range negates the need for an additional power cabinet. We have also been able to reduce the number, size and length of UV lamps without impacting treatment performance. By continually developing UV water treatment technology we are able to meet our yachting customers high expectations.”

Purestream advert
Danfoss - Marpol approved
Advertise with Clean Shipping International